The Audio Click That Took a Year to Trace to a Capacitor
Chasing an audio artifact on power loss

Drew spent a year chasing a click from the PCM5102A DAC in the SA-01 synth whenever power was cut, even after wiring the datasheet's recommended mute circuit. Oscilloscope traces showed the spike came after the chip had already muted. Extra bulk capacitance fixed it on the breadboard, but the same fix failed on the real board: the 0805 MLCCs lose 50-60% of their capacitance under bias, leaving too little energy to see the chip through its shutdown.
I don't know why they didn't just put 6ms on this but it's 6ms.
- PowerElectronix
I would still use mlcc for the bulk capacitance. Use 12V or 25V ones to not have to worry about voltage bias. You can get quite a lot of capacitance in 0805 these days.
- olelele
Hey cool device!
Seems like it sounds good to, from the demo video.
In hifi amps from 1980-94 or so they implement speaker protection with relays that switch out the speakers before the thump of turning on or off the psu.
- fnord77
I was confused what an SA-01 was and I googled and it came up Casio SA-01 keyboard. But that's apparently unrelated to this project