Why buy a Raspberry Pi when a $50 used phone already has the camera, GPS, and battery?
Why get an expensive Pi when I have an old phone?

A maker pricing out a camera-and-lights project found that a used Redmi 13C 5G or Huawei Mate 30 5G costs roughly $45–75 on Taobao and already packs a 40–50MP camera, GPS, storage, a clock, a battery, a touchscreen, and cellular. A comparably equipped Raspberry Pi 4 build runs about $222–347. The Redmi is rooted and running scheduled wake-and-sleep tasks; the open question is sourcing hundreds of matching phones with healthy batteries.
There's something fun about taking a device made in enormous numbers, giving it a second life, and finding that most of the hardware I was about to assemble is already inside it.
- deng
Nowadays, I just get old laptops with broken screens and take the mainboard out. They are dirt cheap, often even have 16GB of RAM, you can just dump pretty much any linux on them and they are usually way faster than Pis.
The boards are of course bigger, which I guess will be a non-starter for many. They'll also require active cooling unless you downclock them considerably. They often also require more power, although many mainboards can be configured down two a few watts of power consumption, depending on what peripherals and speed you need.
Yeah, it's more work than just getting a Pi, but given the current prices, it makes sense for me.
- Freak_NL
This is the main issue:
> The open question is supply. Finding two good used phones is easy; finding a few hundred matching ones, with healthy batteries and predictable camera behaviour, would take more work. I feel increasingly confident that it’s possible.
RaspberryPies and such are commodity hardware. You can buy one, two, ten, twenty, a hundred, and it just scales along. All of those devices will, barring perhaps a few dead-on-arrival ones covered under warranty, just work out of the box.
A used smartphone will have issues which can vary from device to device, so scaling that would take a very dedicated refurbishing setup where the quirks are ironed out (and the unsalvageable ones discarded).
I would also expect that you are starting out at the other end of the bathtub curve: with new devices you will have a few that fail soon after unboxing and using them a bit, and then they will run fine for years until you start hitting the other end of the curve and wear-related faults pop up. With old cheap phones you would start out at that side of the curve, so if you buy one hundred of those, a bunch will fail at various points soon after deploying them.
The cost of that unpredictable behaviour seems high to me. So much so that I wonder if it wouldn't be cheaper to buy a lot of unsold stock of a certain type of budget smartphone from two or three years back. Those devices could run fine as long as they aren't connected to the internet directly.
- cdetroye
I have recently taken to gathering old phones and putting Nerves on them (Nerves packages up the Erlang VM into a mainline kernel to run on a variety of devices). I got inspired by a talk by Marc Lainez at Goatmire who had put it on a variety of exotic devices (e.g., a Wii).
I am by no means an expert at this, but starting of with a device on the Postmarket OS list and Claude, you can get a lot of these old devices working with mainline Linux and nearly all drivers. The newer devices are a bit harder, but if you go back nearly a decade, they're very easy to get working.
So far I have repurposed a Fairphone 3, Nexus 5, Galaxy S20, and Galaxy Tab 3.0 7". All of them (except the s20) with all drivers working compared to stock. Others have done a lot too: https://github.com/mlainez/awesome-nerves-systems
For DIY projects you can use host USB, or get one of the Adafruit FT232H type boards for GPIO pins.
- yjftsjthsd-h
> Why get an expensive Pi when I have an old phone?
Because the pi has a maintained kernel and a userspace I don't have to fight.
- axegon_
To a degree, I see the author's point. But there is a catch for me: I have a few older phones and the reason why I generally prefer Pi over an old phone is the OS. If I could get a full-fledged linux on a phone, I don't have a big reason to look at Pis: I don't need the gpio in almost all cases. For most phones however, this is not only not straightforward but in 99% of cases not possible at all.
- randomblock1
Reasons to get a Pi: GPIO support, software support, OS updates, free root & bootloader, more flexibility and customizability, extensive documentation and support, consistency, simplicity, more ports, battery optional.
Used phones are good for tinkering, especially for "display with sensors and battery attached" usecases, but there are still plenty of downsides. And unfortunately Linux on phones is just not ready for primetime, last I checked.
- bita_nidir
I shudder with horror when I think of all the good hardware that ends up in landfill every day, due to "no longer supported". It's absolute lunacy!
- dividedbyzero
Different kinds of projects of course but I'm kind of surprised to find that among small computers suitable for running home assistant and a thread network via a USB radio, the Pi 4 and 5 seem to be the only affordable ones that can run fanless without major tinkering. I need the device to be completely silent and it's turning into a much bigger project than I had anticipated. Apparently Pis still have a place even when not needing any GPIO.
- dava96
You could consider getting an older flagship phone perhaps 2022-2023 and have a strong portable device with a decent amount of compute power and not to mention ram. I'm starting to believe that these devices are under utilised and we will see some interesting applications using either with AI or without.
I particuarly think the economics of this are interesting, if you take the one plus 11 you can get one for around £200-250. The CPU is very capable and the alternatives are a PI 5 or N100. You get 16b of ram, a screen, gps, bluetooth a camera... the list goes on.
These devices could really shine as edge computing devices and I believe they are overlooked.
- asmodeuslucifer
I'm a big fan of the esp32. I needed a sensor to beep when a board came down a conveyor, and an esp32 with "VL53L0X Time-of-Flight Ranging Sensor Flight Distance Measurement Module" and a buzzer works perfect for about $10 in parts. Minus the 3d printed box and articulated arm to hold it the right distance away. Call it $10.25.