Chamberlain's myQ app turned garage door alerts into ads, so I replaced it with a $62 open-source board

Garage Door Spam

Chamberlain's myQ app turned garage door alerts into ads, so I replaced it with a $62 open-source board

After Chamberlain cut off third-party API access in 2023, the author bought two ratgdo32 boards running open-source firmware to control garage doors locally over HomeKit and Tailscale. A cron script now checks at night whether a door is left open, echoing a mercury-switch setup his father once wired. Notifications finally say who opened the door, something the ad-cluttered myQ app never managed.

When I was growing up, my father wired a mercury switch onto our garage door that lit up a light in the hallway when we'd left the garage door open.
  1. dietsche

    The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.

    I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!

    After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...

    I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.

  2. wallst07

    Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.

    I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.

    Ecobee you're next, and I hope you go down in flames having such crap software.

  3. superultra

    It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.

    The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.

    It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)

    But for apps like those for garage doors, that’s not a viable strategy.

    I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).

    But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.

    For people who can’t jury rig a solution to their garage door opener, what can they do?

  4. teekert

    Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?

    I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.

    Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.

  5. gbdubs

    One of the the ecosystem providers (Apply/Google/Amazon) should differentiate themselves by offering a certification level for their ecosystem that an IoT device:

    - does not have a subscription fee

    - does not sell data

    - does not have ads or remarket

    - follows basic cyber security hygiene

    - is simple to set up (thinking of my parents)

    - interacts purely through standard protocols

    I have long delayed wiring my home with IoT devices, but would be interested in doing so if I could have some basic assurances about the experience of using it being pleasant and safe. Almost everybody that I know who has invested heavily in IoT has had to treat it like a side project to avoid the various pitfalls.

  6. ww520

    For an older opener that has a button on the wall, consider installing a fingerbot or switchbot next to the button to physically push it. These can be controlled remotely.

  7. dj68k

    Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.

    Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.

    I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend R […]

  8. 100percentjake

    For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.

More from this day

2026-11-19