Fursoy - Out-of-order RV64IMAFDV core in SystemVerilog

Show HN: Fursoy – Out-of-order RV64IMAFDV core in SystemVerilog (Linux 6.6)

Fursoy Slice-1 is a clean-slate 64-bit out-of-order superscalar RISC-V processor written in SystemVerilog. It implements RV64IMAFDV with Zba/Zbb extensions, Sv39 virtual memory, and privilege separation, and successfully boots mainline Linux 6.6.50 with BusyBox userspace. The core features a 2-wide superscalar pipeline, 128-entry reorder buffer, 160-entry physical register file, and non-blocking caches. It meets 500 MHz timing in Nangate 45nm synthesis across 8 functional blocks, with cycle-exact CPI telemetry showing zero conservation errors over 89 million cycles. This project provides a verified, high-performance RISC-V core for research and development.

Every cycle is mutually exclusively owned by one architectural bucket asserted continuously in hardware, with zero CPI conservation errors across 89,861,075 simulated cycles.
  1. Findecanor

    Do post it on Reddit in https://www.reddit.com/r/RISCV/

    I have seen more excitement and community around these kinds of projects there than here.

  2. phendrenad2

    Doing OOO in a one-person project is impressive.

  3. PowerElectronix

    This is really cool. Any chance you'll try to make a few with tiny tap or some service like that?

  4. fursoy

    I built Fursoy Slice-1, a 64-bit out-of-order superscalar RISC-V core (RV64IMAFDV + Zba/Zbb/Zicsr/Zifencei) in SystemVerilog, along with a minimal SoC (5-master crossbar, CLINT, PLIC, 16550 UART, and custom SBI v2.0 firmware).

    At a high level, the core is 2-wide fetch/decode/rename/retire with a 128-entry ROB, 160-entry integer PRF, 8 branch checkpoints for single-cycle speculative RAT rollback, and separate Int/Mem/FP/Vec issue queues. On the memory side, it has a dual-port Sv39 DTLB (64-entry 4-way Tree-PLRU + 8-entry 2 MiB/1 GiB superpage CAM), ITLB, and a 16 KiB 8-bank non-blocking L1D. Instead of flushing dirty lines on every page-table walk, the hardware PTW snoops dirty L1D sets non-destructively so Linux page-table updates are visible directly, paired with store-queue drain on SFENCE.VMA.

    In Verilator, it boots mainline Linux 6.6.50 and BusyBox userspace in ~89.8M cycles (~76.2M retired instructions, 2,255 page faults handled) while checking an 8-bucket single-owner CPI conservation invariant every cycle with 0 cycle leakage. Synthesizing the 8 main core logic blocks standalone with sv2v + Yosys + OpenSTA on Nangate 45nm (SRAMs/PRFs black-boxed, pre-P&R) meets 500 MHz across all 8/8 blocks at ~219 kGE, after rebuilding the ALU and branch unit as Kogge-Stone prefix trees and balancing high-fanout CSR/TLB paths.

    I used an AI-agent-assisted workflow for RTL iteration and verification scaffolding while driving the microarchitecture, timing closure, and debugging myself. T […]

More from this day

2026-11-14